Construction performance coatings: the coating according to the construction manual dilution ratio, wool brush brushing the surface does not absorb, hard feelings, feel the smooth performance of the construction as possible. Note that, in some high-grade paint inside, in order to enable the manufacturer to achieve a good coating on the wall fullness use, additives are often added to control the thickness of the squeegee. These additives added to the coating, the "drag brush" feeling. But does it on behalf of the poor performance of construction is a matter of the beholder. Paint brushing common quality defects (7) off: The main reason is the low temperature paint construction, failed to form a continuous coating and cracking paint decoration classification, water that will fall off; grassroots loose, there is oil and other contaminants Interior decoration paint brand, good adhesion of the coating with the grass roots, causing flaking; low intensity grassroots putty, putty that does not dry brushing paint; grassroots too smooth paint the top ten brands of home improvement, to cause the coating adhesion not good. Peeling: Prevention: Before construction first look, if leakage occurs should be requesting the authorities to resolve, should be added to special treatment, it is recommended durability and waterproof shells grant courage to the wall as a pretreatment, and then press the conventional coating brush. Be sure to clean the construction wall treatment. Home improvement paint Category | large Yu Industry (certified) | home improvement paint provided by Luoyang, Henan Industries Limited. Luoyang, Henan Industrial Co., Ltd. (www.lydayushiye.com/) is Luoyang, interior paint leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Industry leaders in the large Yu staff warmly welcome all inquiries negotiations to create a large Henan Industry a better future.